COMPACT AND MOBILE
A skid steer engine is used as the carrier to transport the feed frame and water pump. This compact, mobile unit ensures quick setup time and ease of moving from site to site. The skid steer’s diesel engine is also used to power the hydraulics for drilling operation. No electricity supply is required.
The independent mounted control panel uses a lightweight polyethylene enclosure weighing only 40 kgs. Optional BQ™ head and BQ rod holder further minimizes the weight of this drill.
The direct drive 400 series feed frame is fitted with a regenerative circuit that provides high rod handling speed, increased safety and significantly reduced maintenance requirements.
The LM30SS is capable of both wireline and conventional coring.
1. MOBILE UNIT
The compact and mobile unit ensures quick setup time and ease of moving from site to site.
2. VARIABLE CONTROLS
Variable controls to ensure smooth operation throughout the operating range.
3. DIRECT COUPLED FEED FRAME
Direct coupled feed frame reduces maintenance requirements.
4. HIGH-PRESSURE BREAKOUT
Breakout system features high-pressure circuit to effortlessly break rod joints.
5. INTEGRATED POSITIONER AND TURNTABLE
Integrated positioner and turntable allow for variable angle drilling with ease.
6. FAIL-SAFE ROD CLAMP
Spring-close and hydraulic open rod clamp ensures fail safe operation in case of a burst hose.
7. SMART HYDRAULICS
Smart hydraulics with synchronized control between rotation unit and foot clamp allow for faster and safer rod handling.
|Vertical Depth Capacity (400FF)||410 m (NRQ)||1340 ft (NRQ)|
|Drill Rod Size||AQ to HQ|
|Feed Force||42 kN||9,440 lb|
|Pull Force||40.3 kN||9,060 lb|
|Feed Length||1.1 m||3 ft 7 in|
|Head Torque||104 N-m @ 1,200 RPM
375 N-m @ 500 RPM
|77 ft-lb @ 1,200 RPM
276 ft-lb @ 500 RPM
|Diesel Engine||54 kW||73 hp|